How to Adjust Your Cabinet Drawers on an Inset Cabinet
To remove your drawer, start by pulling it out to locate the locking devices on the bottom of the drawer box
Find the two orange levers near the front of the drawer box and squeeze them towards the outside of the cabinet
You can then remove the drawer from the cabinet
To put the drawer back, set these channels on the drawer guides
Push the drawer back in until you hear an audible click as the locking devices engage
To adjust the height of the drawer front, locate the small adjustment mechanism and move it toward the back of the drawer to move the drawer front up
Reverse this process to lower the drawer front
To adjust the left and right movement of the drawer front, locate the roller adjustment mechanism and roll it to move the drawer front left or right
Reverse this process to move the drawer front in the opposite direction
To adjust the in and out movement of your drawer, locate the orange adjustment mechanism shown here
Rotate this adjustment mechanism with a screwdriver to correct any flushness issues you may have with the drawer front in relation to the cabinet frame
Reverse this process to move the drawer front in the opposite direction
On all of these adjustments, you may need to adjust one or both of the locking devices
The tilt adjustment will change the pitch of your drawer box
On this particular cabinet, the counter tops have not been installed yet
If your counter tops have been installed, you may need to remove your drawer and make this adjustment through the drawer opening
Pivot these adjustments mechanisms to tilt the rear of the drawer box according to your needs